Description
Diamond Aurora Green is a deep green with a diamond sparkle and a light aurora shift, so the color shimmers and changes as you move around the car or as the sun moves across it. Parked it reads as a rich jewel green. Rolling under streetlights it catches a cooler aurora flash that flat paint and ordinary wraps simply cannot do.
The look is only half the job. This is color paint protection film, not vinyl. The same 7.5mil TPU that carries the Aurora Green tint sits over your factory paint and takes the hits for it, so rock chips, road grit, light scratches and bug acid land on the film instead of your clear coat. You change the color of your car and shield the paint underneath in one layer.
Key features
Self-healing topcoat: minor scratches and swirl marks fade out with heat from the sun or a heat gun.
Hydrophobic surface: water and dirt bead off instead of sticking, so the film stays cleaner for longer.
Acid rain and oxidation resistant: holds up against acid rain, oxidation and yellowing over years of daily driving.
Stain and penetration resistant: bird droppings, tree sap and grease do not soak into the film.
Flexible and tear resistant: high elongation and tensile strength let it stretch over curves without cracking.
Mirror-gloss finish: the glass-crystal top layer boosts paint depth and gloss by up to 40 percent and smooths out orange peel.
Removable adhesive: peels off cleanly with heat, with no glue residue left behind.
Bubble-free install: designed to lay flat without bubbling, warping or lifting at the edges.
The Wrapteck 3-layer TPU structure
Specifications
| Material | TPU (thermoplastic polyurethane) |
| Thickness | 7.5mil (330 ± 10µm) |
| Structure | 3 layers |
| Raw material | Lubrizol TPU resin |
| Adhesive | Ashland acrylic adhesive |
| Topcoat | Cashew-based coating |
| Application | Wet install |
| Roll width | 1.52m (5ft) |
| Roll lengths | 3m, 6m, 9m and 15m |
Lab test report
| Performance level | Premium | Material | TPU—Thermoplastic Polyurethane Elastomer |
| Temperature resistance | -40°c to +120°c | Surface Type | Anti-scratch TPU PPF Car Surface Protection Film |
| Film thickness (with glue) | 140micron | Release paper | 140g/m2, Silicone coated with air channels |
| Adhesive thickness | 30μm |
Adhesive |
Henkel solvent-based Acrylic-based, repositionable, slidable |
| Adhesive type | Pressure-sensitive | Texture Effect | Anti-scratch Color TPU PPF Car Surface Protection Film |
| Adhesive power | 18N/25mm | Adhesive features | Air-Release, Permanent, Removable |
| Heat temperature | More than +120°c | Tensile strength | Along: min. 19Mpa, Across: min 19Mpa |
| Application method | Dry & Wet Installation | Application surface | Compound curves, Concave surfaces, Corrugations, Flat, Simple curves |
| Removability | Removable with heat | Elongation | Along: min. 130%, Across: min. 150% |
| Application temperature | +8°C minimum (air and substrate) | Application | Cars & Vans, Trucks, Watercraft, Laptop, Cell phones, Wall, Furniture etc. |
| Expected Durability | 8 years | Features | Stretchable, Removable, UV proof, Weather proof, Water proof, Resistant to solvents, Easy cleaning, Easy maintenance, Stylish, can stick any where |
