Description
The 5D carbon fiber pattern delivers the depth and dimension of real woven carbon right on your panels. Each weave cell catches light at a slightly different angle, giving the surface a layered, three-dimensional look that flat vinyl wraps simply cannot replicate.
Underneath the texture sits a genuine TPU paint protection film: UV resistant to stop fading, hydrophobic so water sheets off without spotting, and tough enough to take stone chips and road debris without marking the paint underneath. Carbon fiber look and paint protection in a single film.
Key features
- 5D carbon fiber texture: deeply contoured weave pattern that mimics real carbon fiber in look and dimension
- TPU construction: thermoplastic polyurethane film built for durability, not standard vinyl
- UV resistant: blocks UV rays to protect paint color and prevent the film from yellowing over time
- Impact resistant: absorbs stone chips, road grit, and minor abrasion before they reach your paint
- Hydrophobic surface: water beads and runs off cleanly, keeping the texture looking sharp between washes
- Repositionable low-tack adhesive: lifts cleanly without leaving residue, so you can adjust during install and remove without damage later
-
Specifications
Material Thermoplastic Polyurethane (TPU) Texture 5D carbon fiber texture Properties Hydrophobic surface, UV resistant, impact resistant Adhesive High-performance low-tack, repositionable Removable Lifts cleanly without residue on sound paint Lab test report
Performance level Premium Material TPU—Thermoplastic Polyurethane Elastomer Temperature resistance -40°c to +120°c Surface Type Anti-scratch TPU PPF Car Surface Protection Film Film thickness (with glue) 140micron Release paper 140g/m2, Silicone coated with air channels Adhesive thickness 30μm Adhesive
Henkel solvent-based Acrylic-based, repositionable, slidable Adhesive type Pressure-sensitive Texture Effect Anti-scratch Color TPU PPF Car Surface Protection Film Adhesive power 18N/25mm Adhesive features Air-Release, Permanent, Removable Heat temperature More than +120°c Tensile strength Along: min. 19Mpa, Across: min 19Mpa Application method Dry & Wet Installation Application surface Compound curves, Concave surfaces, Corrugations, Flat, Simple curves Removability Removable with heat Elongation Along: min. 130%, Across: min. 150% Application temperature +8°C minimum (air and substrate) Application Cars & Vans, Trucks, Watercraft, Laptop, Cell phones, Wall, Furniture etc. Expected Durability 8 years Features Stretchable, Removable, UV proof, Weather proof, Water proof, Resistant to solvents, Easy cleaning, Easy maintenance, Stylish, can stick any where
