Description
Celadon is one of those colors that refuses to stay the same. In flat morning light it reads as a soft sage green. Under direct sun the micro-flake diamond particles ignite and push the whole panel toward silver-grey. The result is a gloss finish that feels hand-crafted rather than off a production line, and it costs a fraction of what a custom specialty paint job would run.
The polymeric PVC face film wraps over your factory paint and takes on the daily wear of road grime, UV, and car-wash brushes so the original paint underneath stays untouched. If your plans change, the wrap removes cleanly and leaves no permanent mark.
Key features
- Diamond micro-flake particles shift the color from sage green to silver-grey depending on the angle and intensity of light
- Gloss polymeric PVC face film, 3.7 to 4.1 mil thick with a 90-micron PVC face layer for a smooth, lustrous finish
- Henkel solvent-based acrylic adhesive with air-release channels for bubble-free installation, dry or wet method
- Handles temperatures from -30 to +140 C so it stays stable in extreme heat and cold climates
- Covers and protects factory paint from UV, surface scratches, and road grime without permanent alteration
- Removes cleanly when you are ready, leaving factory paint untouched underneath
- The Wrapteck 3-layer TPU structure
Specifications
| Material | TPU (thermoplastic polyurethane) |
| Thickness | 7.5mil (330 ± 10µm) |
| Structure | 3 layers |
| Raw material | Lubrizol TPU resin |
| Adhesive | Ashland acrylic adhesive |
| Topcoat | Cashew-based coating |
| Application | Wet install |
| Roll width | 1.52m (5ft) |
| Roll lengths | 3m, 6m, 9m and 15m |
Lab test report
| Performance level | Premium | Material | TPU—Thermoplastic Polyurethane Elastomer |
| Temperature resistance | -40°c to +120°c | Surface Type | Anti-scratch TPU PPF Car Surface Protection Film |
| Film thickness (with glue) | 140micron | Release paper | 140g/m2, Silicone coated with air channels |
| Adhesive thickness | 30μm |
Adhesive |
Henkel solvent-based Acrylic-based, repositionable, slidable |
| Adhesive type | Pressure-sensitive | Texture Effect | Anti-scratch Color TPU PPF Car Surface Protection Film |
| Adhesive power | 18N/25mm | Adhesive features | Air-Release, Permanent, Removable |
| Heat temperature | More than +120°c | Tensile strength | Along: min. 19Mpa, Across: min 19Mpa |
| Application method | Dry & Wet Installation | Application surface | Compound curves, Concave surfaces, Corrugations, Flat, Simple curves |
| Removability | Removable with heat | Elongation | Along: min. 130%, Across: min. 150% |
| Application temperature | +8°C minimum (air and substrate) | Application | Cars & Vans, Trucks, Watercraft, Laptop, Cell phones, Wall, Furniture etc. |
| Expected Durability | 8 years | Features | Stretchable, Removable, UV proof, Weather proof, Water proof, Resistant to solvents, Easy cleaning, Easy maintenance, Stylish, can stick any where |
