Description
Thunder Lightning Sparkling Chameleon is a wrap that refuses to sit still. The sparkle catches the light and the color rolls across the panel as you walk past, flipping between deep stormy tones and brighter electric highlights with every angle and every change in the sun. Park it, drive it, watch it move under street lamps. The finish never looks like one flat color, and that is the whole point.
Under the shimmer it is doing real work. The film lays a tough cosmetic layer over your factory paint, taking the daily hits from grit, sun, light scuffs and wash swirls so the original paint stays sealed and clean. When you want a fresh look later, it peels back off and leaves the paint underneath the way it started.
Key features
- Color shifts as you move: layered pigment flips the shade with the viewing angle and the light, so the car looks alive in motion and never the same in two photos.
- Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
- Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
- Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
- Removable: peels off cleanly later with heat, so you can change the look or go back to stock.
- UV and weather resistant: the topcoat holds up to sun and rain across a -30 to +140 degree range.
- The Wrapteck 3-layer TPU structure
Specifications
| Material | TPU (thermoplastic polyurethane) |
| Thickness | 7.5mil (330 ± 10µm) |
| Structure | 3 layers |
| Raw material | Lubrizol TPU resin |
| Adhesive | Ashland acrylic adhesive |
| Topcoat | Cashew-based coating |
| Application | Wet install |
| Roll width | 1.52m (5ft) |
| Roll lengths | 3m, 6m, 9m and 15m |
Lab test report
| Performance level | Premium | Material | TPU—Thermoplastic Polyurethane Elastomer |
| Temperature resistance | -40°c to +120°c | Surface Type | Anti-scratch TPU PPF Car Surface Protection Film |
| Film thickness (with glue) | 140micron | Release paper | 140g/m2, Silicone coated with air channels |
| Adhesive thickness | 30μm |
Adhesive |
Henkel solvent-based Acrylic-based, repositionable, slidable |
| Adhesive type | Pressure-sensitive | Texture Effect | Anti-scratch Color TPU PPF Car Surface Protection Film |
| Adhesive power | 18N/25mm | Adhesive features | Air-Release, Permanent, Removable |
| Heat temperature | More than +120°c | Tensile strength | Along: min. 19Mpa, Across: min 19Mpa |
| Application method | Dry & Wet Installation | Application surface | Compound curves, Concave surfaces, Corrugations, Flat, Simple curves |
| Removability | Removable with heat | Elongation | Along: min. 130%, Across: min. 150% |
| Application temperature | +8°C minimum (air and substrate) | Application | Cars & Vans, Trucks, Watercraft, Laptop, Cell phones, Wall, Furniture etc. |
| Expected Durability | 8 years | Features | Stretchable, Removable, UV proof, Weather proof, Water proof, Resistant to solvents, Easy cleaning, Easy maintenance, Stylish, can stick any where |
