Description
Magic Flip Grey Green PPF keeps your factory paint exactly the way it looks now. The film goes on glossy and stays nearly invisible, so the color you paid for shines through while a tough layer takes the rock chips, bug splatter, and swirl marks for you. Park anywhere, drive anywhere, and the paint underneath stays clean.
This is real paint protection film, not a cosmetic vinyl. The 7.5mil (330um) three-layer TPU film soaks up impacts and road debris, then the self-healing topcoat erases light scratches with a little heat from the sun or warm water. You get the showroom shine you already love with a shield that works while you are not even thinking about it.
Key features
- Self-healing topcoat: minor scratches and swirl marks fade out with heat from the sun or a heat gun.
- Hydrophobic surface: water and dirt bead off instead of sticking, so the film stays cleaner for longer.
- Acid rain and oxidation resistant: holds up against acid rain, oxidation and yellowing over years of daily driving.
- Stain and penetration resistant: bird droppings, tree sap and grease do not soak into the film.
- Flexible and tear resistant: high elongation and tensile strength let it stretch over curves without cracking.
- Mirror-gloss finish: the glass-crystal top layer boosts paint depth and gloss by up to 40 percent and smooths out orange peel.
- Removable adhesive: peels off cleanly with heat, with no glue residue left behind.
- Bubble-free install: designed to lay flat without bubbling, warping or lifting at the edges.
- The Wrapteck 3-layer TPU structure
Specifications
| Material | TPU (thermoplastic polyurethane) |
| Thickness | 7.5mil (330 ± 10µm) |
| Structure | 3 layers |
| Raw material | Lubrizol TPU resin |
| Adhesive | Ashland acrylic adhesive |
| Topcoat | Cashew-based coating |
| Application | Wet install |
| Roll width | 1.52m (5ft) |
| Roll lengths | 3m, 6m, 9m and 15m |
Lab test report
| Performance level | Premium | Material | TPU—Thermoplastic Polyurethane Elastomer |
| Temperature resistance | -40°c to +120°c | Surface Type | Anti-scratch TPU PPF Car Surface Protection Film |
| Film thickness (with glue) | 140micron | Release paper | 140g/m2, Silicone coated with air channels |
| Adhesive thickness | 30μm |
Adhesive |
Henkel solvent-based Acrylic-based, repositionable, slidable |
| Adhesive type | Pressure-sensitive | Texture Effect | Anti-scratch Color TPU PPF Car Surface Protection Film |
| Adhesive power | 18N/25mm | Adhesive features | Air-Release, Permanent, Removable |
| Heat temperature | More than +120°c | Tensile strength | Along: min. 19Mpa, Across: min 19Mpa |
| Application method | Dry & Wet Installation | Application surface | Compound curves, Concave surfaces, Corrugations, Flat, Simple curves |
| Removability | Removable with heat | Elongation | Along: min. 130%, Across: min. 150% |
| Application temperature | +8°C minimum (air and substrate) | Application | Cars & Vans, Trucks, Watercraft, Laptop, Cell phones, Wall, Furniture etc. |
| Expected Durability | 8 years | Features | Stretchable, Removable, UV proof, Weather proof, Water proof, Resistant to solvents, Easy cleaning, Easy maintenance, Stylish, can stick any where |
