Description
Demon Green Sparkling Chameleon is a deep, metallic green that refuses to sit still. Roll the car under sunlight or streetlights and the panels flip from a poison-green core toward teal, acid lime, and warm gold at the edges. The fine sparkle in the film catches every beam, so the whole body looks alive as you walk around it. No flat single-tone here. Every curve reads a different shade depending on where you stand.
This is a real color-shift vinyl, so the flip lives in the film itself, not in a coating that fades. It lays over your factory paint and seals it off from sun, light scratches, road grime, and washing wear, while giving you a finish a normal paint job can not touch. When you want your original color back, the wrap peels away and the paint underneath is still there.
Key features
- Color shifts as you move: layered pigment flips the shade with the viewing angle and the light, so the car looks alive in motion and never the same in two photos.
- Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
- Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
- Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
- Removable: peels off cleanly later with heat, so you can change the look or go back to stock.
- UV and weather resistant: the topcoat holds up to sun and rain across a -30 to +140 degree range.
- The Wrapteck 3-layer TPU structure
Specifications
| Material | TPU (thermoplastic polyurethane) |
| Thickness | 7.5mil (330 ± 10µm) |
| Structure | 3 layers |
| Raw material | Lubrizol TPU resin |
| Adhesive | Ashland acrylic adhesive |
| Topcoat | Cashew-based coating |
| Application | Wet install |
| Roll width | 1.52m (5ft) |
| Roll lengths | 3m, 6m, 9m and 15m |
Lab test report
| Performance level | Premium | Material | TPU—Thermoplastic Polyurethane Elastomer |
| Temperature resistance | -40°c to +120°c | Surface Type | Anti-scratch TPU PPF Car Surface Protection Film |
| Film thickness (with glue) | 140micron | Release paper | 140g/m2, Silicone coated with air channels |
| Adhesive thickness | 30μm |
Adhesive |
Henkel solvent-based Acrylic-based, repositionable, slidable |
| Adhesive type | Pressure-sensitive | Texture Effect | Anti-scratch Color TPU PPF Car Surface Protection Film |
| Adhesive power | 18N/25mm | Adhesive features | Air-Release, Permanent, Removable |
| Heat temperature | More than +120°c | Tensile strength | Along: min. 19Mpa, Across: min 19Mpa |
| Application method | Dry & Wet Installation | Application surface | Compound curves, Concave surfaces, Corrugations, Flat, Simple curves |
| Removability | Removable with heat | Elongation | Along: min. 130%, Across: min. 150% |
| Application temperature | +8°C minimum (air and substrate) | Application | Cars & Vans, Trucks, Watercraft, Laptop, Cell phones, Wall, Furniture etc. |
| Expected Durability | 8 years | Features | Stretchable, Removable, UV proof, Weather proof, Water proof, Resistant to solvents, Easy cleaning, Easy maintenance, Stylish, can stick any where |
