Description
Night Elf Black Red starts as a deep, moody black and then catches fire. Move around the panel or roll into changing light and you watch black bleed into glowing red, like embers waking up across the bodywork. The flip never sits still, so the car reads differently from every angle and in every kind of light. It is the kind of finish that makes people circle the car twice before they figure out what color it actually is.
This is a gloss color-shift vinyl, so it lays a smooth reflective skin over your factory paint. That wrap takes the daily hits from sun, light grit and road film while the original paint stays sealed and protected underneath. When you want a change later it comes back off, and the paint it was hiding is still there.
Key features
- Color shifts as you move: layered pigment flips the shade with the viewing angle and the light, so the car looks alive in motion and never the same in two photos.
- Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
- Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
- Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
- Removable: peels off cleanly later with heat, so you can change the look or go back to stock.
- UV and weather resistant: the topcoat holds up to sun and rain across a -30 to +140 degree range.
- The Wrapteck 3-layer TPU structure
Specifications
| Material | TPU (thermoplastic polyurethane) |
| Thickness | 7.5mil (330 ± 10µm) |
| Structure | 3 layers |
| Raw material | Lubrizol TPU resin |
| Adhesive | Ashland acrylic adhesive |
| Topcoat | Cashew-based coating |
| Application | Wet install |
| Roll width | 1.52m (5ft) |
| Roll lengths | 3m, 6m, 9m and 15m |
Lab test report
| Performance level | Premium | Material | TPU—Thermoplastic Polyurethane Elastomer |
| Temperature resistance | -40°c to +120°c | Surface Type | Anti-scratch TPU PPF Car Surface Protection Film |
| Film thickness (with glue) | 140micron | Release paper | 140g/m2, Silicone coated with air channels |
| Adhesive thickness | 30μm |
Adhesive |
Henkel solvent-based Acrylic-based, repositionable, slidable |
| Adhesive type | Pressure-sensitive | Texture Effect | Anti-scratch Color TPU PPF Car Surface Protection Film |
| Adhesive power | 18N/25mm | Adhesive features | Air-Release, Permanent, Removable |
| Heat temperature | More than +120°c | Tensile strength | Along: min. 19Mpa, Across: min 19Mpa |
| Application method | Dry & Wet Installation | Application surface | Compound curves, Concave surfaces, Corrugations, Flat, Simple curves |
| Removability | Removable with heat | Elongation | Along: min. 130%, Across: min. 150% |
| Application temperature | +8°C minimum (air and substrate) | Application | Cars & Vans, Trucks, Watercraft, Laptop, Cell phones, Wall, Furniture etc. |
| Expected Durability | 8 years | Features | Stretchable, Removable, UV proof, Weather proof, Water proof, Resistant to solvents, Easy cleaning, Easy maintenance, Stylish, can stick any where |
