Description
Pink Red Diamonds shifts between a warm rose blush and a deep crimson depending on the angle of the light. Millions of diamond micro-flakes are suspended in the gloss face film, catching direct sun like a scatter of crushed gems and softening to a rich berry tone in shade. No two views look the same.
This wrap lays over your factory paint, shielding it from everyday scuffs, road grime, and UV fade while you enjoy a custom finish that would cost a fortune to replicate in paint. When you are ready for a change, it peels away cleanly and leaves the original surface untouched.
Key features
- Diamond micro-flake effect that shifts between pink rose and deep red depending on light angle and viewing distance
- Gloss finish with high clarity that amplifies the sparkle of each individual flake in direct sunlight
- Polymeric PVC face film at 90 micron (3.7–4.1 mil total face) for a conformable, panel-hugging lay
- Henkel solvent-based acrylic air-release adhesive for bubble-free application whether you install dry or wet
- PET plastic liner at 75 micron for flat, consistent unrolling and precise positioning during install
- Heat resistance from -30 to +140 C so the film stays stable in cold winters and hot summer parking lots
- The Wrapteck 3-layer TPU structure
Specifications
| Material | TPU (thermoplastic polyurethane) |
| Thickness | 7.5mil (330 ± 10µm) |
| Structure | 3 layers |
| Raw material | Lubrizol TPU resin |
| Adhesive | Ashland acrylic adhesive |
| Topcoat | Cashew-based coating |
| Application | Wet install |
| Roll width | 1.52m (5ft) |
| Roll lengths | 3m, 6m, 9m and 15m |
Lab test report
| Performance level | Premium | Material | TPU—Thermoplastic Polyurethane Elastomer |
| Temperature resistance | -40°c to +120°c | Surface Type | Anti-scratch TPU PPF Car Surface Protection Film |
| Film thickness (with glue) | 140micron | Release paper | 140g/m2, Silicone coated with air channels |
| Adhesive thickness | 30μm |
Adhesive |
Henkel solvent-based Acrylic-based, repositionable, slidable |
| Adhesive type | Pressure-sensitive | Texture Effect | Anti-scratch Color TPU PPF Car Surface Protection Film |
| Adhesive power | 18N/25mm | Adhesive features | Air-Release, Permanent, Removable |
| Heat temperature | More than +120°c | Tensile strength | Along: min. 19Mpa, Across: min 19Mpa |
| Application method | Dry & Wet Installation | Application surface | Compound curves, Concave surfaces, Corrugations, Flat, Simple curves |
| Removability | Removable with heat | Elongation | Along: min. 130%, Across: min. 150% |
| Application temperature | +8°C minimum (air and substrate) | Application | Cars & Vans, Trucks, Watercraft, Laptop, Cell phones, Wall, Furniture etc. |
| Expected Durability | 8 years | Features | Stretchable, Removable, UV proof, Weather proof, Water proof, Resistant to solvents, Easy cleaning, Easy maintenance, Stylish, can stick any where |
